Board shown: 6'0" x 20" x 2 1/2" 33.2L
-
FOR 1′ – 5′ WAVES (KNEE TO OVERHEAD)
-
WIDER NOSE FOR GETTING IN EARLY
-
PULLED IN TAIL FOR TURNS IN THE POCKET
-
SINGLE CONCAVE CREATES LIFT AND SPEED
-
ONE BOARD FOR ALL YOUR SMALL WAVE NEEDS
The PlayToy is a performance shape that features a wider outline and a lower rocker, yet still keeps a performance foil trough the rail. This blend creates a board that generates tons of speed and flow, while keeping the turning crispy and sharp. The wider outline provides more volume for better paddling ability yet the tail is pulled in which provides quick reaction time when the board is put on rail. Ride this model as a swallow tail for mushier surf or make it a thumb tail if your breaks get a little punchier. Not your traditional “Fish” board, this board is the step down model that allows you excel in playful surf and then transition back to your shortboard for those bigger days with ease.
starting at $525 plus tax / shipping
stock
dimensions
• 5'6" x 19 1/4" x 2 3/8" 28.1 L
• 5'8" x 18 1/4" x 2 3/8" 29.0 L
• 5'10" x 19 1/2" x 2 7/16" 30.9 L
• 6'0" x 19 1/2" x 2 1/2" 32.6 L
• 6'2" x 19 3/4" x 2 1/2" 34.0 L
• 6'4" x 19 3/4" x 2 5/8" 36.4 L
Tail options
-
Squash
-
Square
-
Thumb
-
Round Pin
-
Swallow
-
Diamond
fin setup
-
3 Fin / Thruster
-
4 Fin / Quad (+$20)
-
5 Fin / Quad or Thruster combo (+$30)
fcs or futures
Recommended Fins:
Future Alpha F6
construction
-
Super Light Poly
-
Standard Poly
-
Strong Poly
-
Eps / Epoxy (+$100)
-
Epoxy / Poly (+$100)
-
Epoxy Prolite (+$100)
S glass
Reinforce your board with a layer of this extra strong fiberglass. Used on the deck in combination with E glass add 30% compression strength
+$10 per layer
Carbon Tail Strips
Reinforce the tail section of the deck of your board with carbon fiber added to the fiberglass layup.
+$25
Carbon Center Strip
Reinforce the stringer of the deck or bottom of your board with carbon fiber and increase strength against buckles and breakage.
+$35
Vector Carbon Tail Patch
Reinforce the tail section of the deck of your board with vector carbon which increases strength while maintaining flex.
+$30